News

• 

  303-45 How to calculate the hall flowmeter measuring result?

  2024-06-17 aimsizer Powder Flow

  303-45 How to calculate the hall flowmeter measuring result? The hall flowmeter results are measured by multiplying the arithmetic mean of the three samples results by the funnel correction factor. The data is reported at s/50g, and the reported data is accurate to 0.5s. 303-1 What kind of instrume ...

  Read more

• 

  301-2 In the phrase ＂tap density tester”, what does tap mean?

  2024-06-17 aimsizer Powder Flow

  The word tap means the process of rising and falling. It neither means vibration nor shaking. This measurement process is described above. This process imitates a state that being experienced by the powders during the transportation, which is rising and falling. HMKTest is the world most advanced ta ...

  Read more

• 

  510-108 Precision sieve shaker air jet sieve

  2024-06-17 aimsizer Particle Size

  The first choice of precision sieve shaker is HMK-200 Air Jet Sieve. Use precision airflow to sieve the particles, which is efficient. AIR-200 Air Jet Sieves︱Alpine Micron Air Jet Sieve ...

  Read more

• 

  301-12 Domestic and international standards GB/T 5262-2006 and ISO3953 of metallic powder tapped density determination

  2024-06-17 aimsizer Powder Flow

  In China, metallic powder tapped density determination usually follows the national standard-metallic powder tapped density determination GB/T 5162-2006. This standard is translated from international standard ISO 3953 which has the equal measuring effect with international standard. The two types t ...

  Read more

• 

  201-23 fisher sub sieve sizer and hall flowmeter

  2024-06-17 aimsizer Particle Size

  Fisher sub sieve sizer is to measure the average particle size(fisher number) and the hall flowmeter is to measure the powder’s flow rate. Both of the two  instruments are to measure dry and bulk powder. In industries such as metallurgy and cemented carbide as well as hard alloy 3D-printing or ...

  Read more

• 

  510-69 Air jet sieve 203mm sieve

  2024-06-17 aimsizer Particle Size

  Air jet sieve, 203mm sieve. This specification is for foreign standard. The size of domestic approximate sieve is 200mm. 203mm sieve is international standard 8 inch sieve, which is mainly adopted by foreign air jet sieve. But this will cost much. So we suggest to purchase HMKTest HMK-200 Air Jet Si ...

  Read more

• 

  510-54 Special air jet sieve for plastic materials-HDPE-high density polyethylene particle size distribution

  2024-06-17 aimsizer Particle Size

  Special air jet sieve for plastic materials-HDPE-high density polyethylene refers to the airflow sieve that used to sieve plastic materials-HDPE-high density polyethylene particle size distribution such as HMK-200 Air Jet Sieve. HDPE is a kind of high crystallinity, non-polar thermoplastic resin. Th ...

  Read more

• 

  303-16 What is the requirement of receiver in hall flowmeter?

  2024-06-17 aimsizer Powder Flow

  Can use any clean cup or dish that can hold 50g of metal powder as receiver. The receiver can also be replaced with smooth waxed paper. AS-300A Hall Flowmeter︱Flow Meter Funnel︱Metal Powder Flow Rate︱Apparent Density︱Carney︱Manufacturer ...

  Read more

• 

  303-17 What is the requirement of balance in hall flowmeter?

  2024-06-17 aimsizer Powder Flow

  The balance used in the hall flowmeter measurement shall have the following functions: The maximum measurement weight of the balance is 100g. The accuracy is 0.05g. AS-300A Hall Flowmeter︱Flow Meter Funnel︱Metal Powder Flow Rate︱Apparent Density︱Carney︱Manufacturer ...

  Read more

• 

  201-53 Effects of ammonium dimolybdate properties and reduction process on the particle size of molybdenum powder FISHER SUB SIEVE SIZER

  2024-06-17 aimsizer Particle Size

  201-53 Effects of ammonium dimolybdate properties and reduction process on the particle size of molybdenum powder FISHER SUB SIEVE SIZER Three different ammonium dimolybdate (ADM) were used as raw materials. Adopt two –stage reduction method which uses hydrogen as a reducing agent to make molybdenum ...

  Read more

• 

  303-44 What is the equivalent international standard for hall flowmeter GB1479?

  2024-06-14 aimsizer Powder Flow

  303-44 What is the equivalent international standard for hall flowmeter GB1479? The equivalent international standard for GB1479 is ISO3923/1 determination of bulk density of metallic powders. Part 1 funnel method. AS-300A Hall Flowmeter︱Flow Meter Funnel︱Metal Powder Flow Rate︱Apparent Density︱Carn ...

  Read more

• 

  510 Air jet sieve opening (IN.) nominal

  2024-06-14 aimsizer Particle Size

  510 Air jet sieve opening (IN.) nominal ...

  Read more